Free Market Profile (TPO) chart for NIFTY and NSE stocks in the browser
Free Market Profile (TPO) chart for NIFTY and NSE stocks: TPO letters, POC, value area, initial balance, poor highs and single prints explained.
SuperCharting has a free Market Profile chart, called Time price opportunity (TPO) in the chart type menu. It works for NIFTY, BANKNIFTY, NSE stocks and MCX commodities in the browser. Each trading day becomes one profile: every price row gets a letter for each 30-minute block in which the market traded there. You get the point of control, the value area, the initial balance, poor highs and lows and single prints, all on the free Essential plan.
What a TPO profile shows
A TPO ("time price opportunity") profile answers a simple question: at which prices did the market spend its time today?
- The day is cut into time blocks, 30 minutes by default. The first block is letter A, the second B, and so on (A to Z, then a to z).
- For each block, every price row the market touched gets that block's letter.
- Rows the market visited in many blocks become long, and rows it passed through quickly stay short.
On a normal NSE cash day (09:15 to 15:30) with 30-minute blocks, you get 13 letters, A to M. Where most letters pile up is where buyers and sellers agreed on price. A thin tail is where one side was in a hurry.
The lines and marks on the profile
| Mark | What it means | Setting |
|---|---|---|
| POC (point of control) | The row with the most letters: the day's fairest price | POC, on by default |
| VAH / VAL | The top and bottom of the value area, where 70% of the letters sit | VAH, VAL, on by default |
| Initial balance | The range of the first two blocks (the first hour), drawn as a bar left of the profile | Initial balance range, on by default |
| Poor high / Poor low | A high or low touched in two or more blocks, which often gets revisited | Poor high, Poor low, off by default |
| Single prints | Rows touched in only one block: a fast move that often fills later | Single prints, off by default |
| TPO midpoint | The middle of the day's range | TPO Midpoint, off by default |
| Open / Close | Markers at the day's first and last price | Open, Close, off by default |
The value area is built the standard way. It starts at the POC and adds the next row above or below, whichever has more letters, until 70% of all letters are inside. You can change the 70% in the settings.
A small volume profile is drawn next to the letters (Show volume profile, on by default), so you can see whether time and volume agree.
How to open a TPO chart in SuperCharting
- Open the chart and search for
NSE:NIFTY(or any NSE stock, such asNSE:RELIANCE). - Pick an intraday interval: 15 minutes or 30 minutes reads best.
- Open the chart type menu in the header and choose Time price opportunity.
- Each day is drawn as a profile of letters. Open Settings > Symbol to change the block length (5 minutes to 4 hours), the period (one profile per day or more), the row size and the value area percentage.
- Turn on Poor high, Poor low and Single prints if you trade revisits of those levels.
If you prefer to keep normal candles, open Indicators, then the Fundamentals section, and add Market Profile (TPO). It draws a simpler time-at-price histogram behind the candles for each session (a day on intraday charts), with the value area and a POC line but no letters.
A worked example: reading a NIFTY day
Say NIFTY opens at 24,100. The first hour (blocks A and B) stays between 24,060 and 24,160, so that is the initial balance. Block C breaks above 24,160 and runs to 24,240 within one block, then the market spends blocks D to K between 24,180 and 24,230.
The profile you'd see:
- Single prints from about 24,165 to 24,180, where block C moved up fast.
- POC near 24,205, where most of D to K overlapped.
- Value area roughly 24,185 to 24,225.
- A poor high at 24,240 if two blocks both topped out there.
A common next-day reading: if NIFTY opens inside yesterday's value area, expect rotation inside it. If it opens above the value area and holds, the market has accepted higher prices. Single prints below are a level price may come back to fill.
These are reading habits traders use, not signals. Test any rule on past data with Bar Replay before trusting it.
TPO compared with volume profile
| TPO (Market Profile) | Volume profile | |
|---|---|---|
| Counts | Time: how many blocks touched a price | Volume: how many shares or contracts traded there |
| Best for | Seeing acceptance and rejection over a session | Seeing where the size traded |
| Needs volume data | No | Yes |
Most profile traders look at both. A price with many letters but little volume was "busy but thin"; heavy volume with few letters was a fast fight. For the volume side, see volume profile and the cash session volume profile. For the common profile shapes (P, b, D), see volume profile shapes.
How it is built, and the honest limits
- Finer candles, not ticks. The profile is built from finer candles inside each chart candle. Every price row a finer candle covered gets the block's letter. This is accurate for where the market traded. The exact high and low of a block can differ by a tick from a tick-built profile.
- Intraday intervals work best. On daily and higher intervals the finer data is coarser (15 minutes to 1 hour), so letters are less precise.
- Index symbols have letters but no volume. TPO counts time, so it works on
NSE:NIFTYitself. The index has no traded volume, though, so the volume profile beside the letters stays empty; open the NIFTY futures contract to see both. - Data coverage. NSE, BSE and MCX symbols are covered, live while the exchange is open and the feed allows. See data coverage for each market.
- Currently free. TPO, the footprint and the volume profiles are on Essential, the free plan, today.
For the footprint view of the same data, see the free footprint and volume profile guide. To add a session anchor line, combine the profile with VWAP.
Frequently asked questions
Is the Market Profile chart free?
Yes. The Time price opportunity chart type and the Market Profile (TPO) indicator are on Essential, the free plan.
Which block length should I use for NIFTY?
30 minutes is the classic choice and gives 13 letters for an NSE cash day. Scalpers often use 15 minutes for more detail. Swing traders use one profile per week with 1-hour blocks.
What is the initial balance in TPO?
It is the range of the first two blocks, the first hour with 30-minute blocks. A break of the initial balance early in the day often signals a trend day; a day that stays inside it is usually a rotation day.
Why do poor highs matter?
A poor high is a high touched in two or more blocks without a tail of single prints above it. That suggests the auction did not finish there, and traders watch for price to come back and take it out.
Can I see TPO and volume profile together?
Yes. Show volume profile in the TPO settings draws a volume profile next to the letters, with its own POC, VAH and VAL if you turn them on.